cod. XPP1

OXZT CHAIN LUBE

400 ml

•  • Transparent synthetic lubricant for o-ring transmission
With high-performance
•  • Extreme pressure additives anti-drip for high rotation speeds
Resists the washing away action of water

It lubricates uniformly, does not dirty, high smoothness, protects the transmission from corrosion, even in saline environments, high resistance of the lubricating film. Limits heat generation, extending maintenance intervals. OXZT CHAIN LUBE can be used in wet, dry, road, track, off-road conditions. Its molecules are anchored to the surface and are distributed in an orderly manner, for homogeneous lubrication. To adhere perfectly to the chain, OXZT CHAIN LUBE does not need to be used in large quantities, an excess of product would overlap unnecessarily, creating a layer not anchored to the transmission.

How to use:

•  • Clean the transmission with OXZT CLEANER, or with LINFA BIO MOTO WASH
•  • Shake OXZT CHAIN LUBE and apply a moderate amount on the transmission
•  • Remove excess lubricant with a clean cloth
•  • Wait 2 hours from application (only for strong rotation speeds – race)

cod. XPP2

OXZT CLEANER

500 ml

•  • Mechanical parts degreaser and o-ring transmission
•  • 
Evaporates quickly without leaving any residue
•  • Compatible with rubber parts
•  • High-pressure delivery

Formulated to thoroughly degrease engine and O-RING transmission parts from grease, sludge, scale and tar, degreases and decontaminates, preparing for correct lubrication, indispensable for guaranteeing the efficient performance of the chain lubricant. It is compatible with rubber and plastic parts, it also thoroughly cleans brake pumps, carburettors, clutches, engine parts, gears, the outside of the engine, fork tubes and suspension.

How to use:

•  • Wait for the engine to cool down.
•  • Shake well before use.
•  • Spray at a distance of 15 cm consecutively for at least 4 seconds.
•  • If necessary, use an F-CLEAN EVO cloth soaked in OXZT CLEANER
•  • Apply OXZT CHAIN LUBE to lubricate the transmission.

cod. XPP3

LUXE

400 ml

•  • Protective polish with silicone
•  • 
Renews rubber and plastic parts
•  • Water-repellent film with release agent

Resistant to high temperatures, it protects and makes the whole engine block shiny, complete titanium exhaust, carbon trim, frame, rubber, engine sleeves, fork outer tubes and plastics. It restores deteriorated parts, forming a glossy transparent film that protects against corrosion, humidity, dirt, sun and saline conditions. In extreme off-road situations, it creates a film that reduces the attachment of mud and dirt on rims, spokes, undercarriage, chassis, mudguards, plastics, exhaust, engine and protects electric parts from the water, even when crossing fords. Do  not use on the brakes.

How to use:

•  • Wait for the engine to cool down.

•  • Apply after cleaning, shake before use.

•  • Spray evenly from a distance of 15 cm with the F-CLEAN cloth, or spray on the cloth and apply.

•  • Do not use cloths soaked in LUXE with other products.

cod. XPP4

ACTIVE FOAM

400 ml

•  • Helmet and motorcycle cleaner 
For matte and gloss painting

•  • Eliminates gnats, halos, sweat, dirt and oil

Thoroughly cleans fairings and helmet with both matte and glossy paint, frame, chrome parts, fork tubes, exhaust, TFT and touch instruments, knobs, aluminium, steel, carbon, titanium, unpainted plastic, mirrors, plexiglass, ceramic coatings, anodised parts, helmet shell, visor (also mirrored), interior lining, natural and synthetic leather, boots, leather suits. It does not damage stickers and graphics. It does not contain  silicone. Do not use on suede and nubuck leather. Protect from frost.

How to use this motorcycle cleaner:

•  • Wait for the engine and exhaust to cool down.

•  • Shake well before use.
•  • Proceed in small areas to prevent the product from dissolving.

•  • Distribute evenly and, when the foam starts to dissolve, remove with the F- CLEAN EVO cloth or spray on the cloth and remove the dirt. Cleaning the helmet and leather cover:


Instructions for use cleaning helmet lining and leather:

•  • Shake well before use.

•  • Spray and remove with the F-CLEAN cloth (or with an ANTIBACTERIAL cloth).

cod. XPP6

RF54 WHEEL CLEANER

400 ml

•  • Protects and polishes from the first application
•  • Easily removes stubborn dirt
With anti-rust
•  • Water-repellent and anti-corrosion additives
Eliminates stubborn dirt such as sludge, incrustations, glue, grease, road dirt, tar and melted rubber residues on racing motorcycles. Forms an anti- corrosion film that protects the rims from atmospheric and saline agents. Removes stubborn stains and dirt from painted parts. Silicone-free.

How to use:
•  • Not for use on brakes and tires.
•  • Proceed with cleaning in small areas.

•  • Spray directly, or onto the F-CLEAN cloth, and proceed with cleaning.

cod. XPP7

STOP BRAKE CLEANER

500 ml

•  • High-performance brake cleaner
•  • Evaporates quickly
•  • 
Does not leave any residue high-pressure regulator

To ensure correct operation and controlled wear of a high-performance brake system, perfectly clean calliper, discs and pads are essential. Degreases thoroughly and evaporates quickly, eliminates any type of dirt and residues from organic, sintered and carbon-ceramic pads, leaves no oily residues and does not attack the rubber and plastic parts. It offers maximum performance, even in the most extreme competitions, meeting the specific needs of all types of motorcycles: greater control,  system stability, increased braking power, constant braking modulation.

How to use:

•  • Wait for the brakes to cool down.

•  • Shake well before use.

•  • Spray directly, or onto the F-CLEAN EVO cloth, and proceed with cleaning.

cod. XPP8

HYDRO-XMULTY SMART

400 ml

•  • Unblocking
•  • Lubricant
•  • Protective
•  • Detergent
•  • Water-repellant
•  • Deoxidiser
•  • Antifreeze
•  • Rustproof
Anticorrosion, also for marine use
•  • Smart button with dual delivery
•  • Cannula 360° all-position valve

Unblocking lubricant with smart button and double dispensing cannula for nuts, screws, bolts and mechanisms jammed due to rust or scale. Deoxidiser for electrical and electronic contacts, with 360° all-position valve. Anti-freezing and anti-corrosive for engine parts and precision mechanisms, also for marine use. Cleanses, lubricates, protects levers, wheel studs, spring footrests and precision mechanisms, eliminates  humidity and dirt.

How to use:

•  • Shake before use and spray on the part.
•  • If necessary, use a cloth.

cod. XPP11

CERAFAST

300 ml

•  • Painted and transparent parts of the motorcycle and helmet
•  • 
Natural and hydrophobic

•  • Glossy and silky-to-the touch paints
•  • It protects against dirt penetration, insects

Even at low dosages, it has high sliding properties and guarantees the immediate breaking of the water film, with silk effect on the painted parts. Forms a persistent protective film, without layering with use, that prevents ageing of surfaces. It is high-performing as a finish after each wash and prevents dirt, weathering and insects from clinging to the treated parts, allowing the painted parts of motorcycles and helmets to shine. It does not stain plastic and rubber parts and does not contain  solvents or abrasives.

How to use:

•  • After washing, spray evenly.

•  • Spread the product with the clean F-CLEAN cloth, without drying completely.

•  • Wait one minute and finish with the dry F-CLEAN cloth.

cod. XPP12

LINFA BIO MOTO WASH trigger

750 ml

•  • Concentrated shampoo for adherent dirt with rapid and powerful rinsing action

•  • Biodegradable and without petroleum solvents
•  • 
Ideal for the cleaning of motorcycles and spoked wheels
•  • Eliminates mud, oil, sludge and grease
•  • Concentrated and with rinsing action for the cleaning of the o-ring transmission and engine

Biodegradable with additives, detergents and degreasers specific for the cleaning of off-road, road and touring motorcycles. It can be used both concentrated and diluted to give protection and shine to all surfaces of the motorcycle and eliminate mud, oil, grease and sludge. Ideal for cleaning precious components such as carbon, aluminium, titanium, anodised and delicate parts, it does not compromise the brake and suspension action. Cleans not only the painted surfaces but also the mechanical parts, including the transmission. It does not affect seals, plastics, rubber parts,  o-rings, tyres and engine muffs. It does not corrode, scratch or stain.

Cleaning the transmission:

•  • Wait for the engine to cool down.
•  • Apply LINFA BIO MOTO WASH concentrate, using a brush or paintbrush.
•  • Rinse, dry and lubricate with OXZT CHAIN LUBE.

Full cleaning:

•  • Wait for the engine to cool down, remove dust, mud, sand or heavy dirt with a jet of water. Dilute LINFA BIO MOTO WASH up to 1:10 in a bucket of water depending on the degree of dirt and proceed with cleaning with the help of a sponge. Rinse with water and dry.
•  • Or, wet the surfaces with water, spray LINFA BIO MOTO WASH concentrate evenly, wait 2 minutes and remove with a jet of water. If necessary, add product and use a brush or sponge. Rinse with water and dry.

cod. XPP10

LIFE4X

200 ml

•  • Protective cream for leather surfaces
•  • Restructuring from dryness
•  • Ageing nourishes in depth

Micro-technological nourishing cream that softens leather and protects immediately without greasing. From leather racing suit to jacket, from boots to gloves, it gives waterproof protection, improves the intensity of the colour, and enhances the natural finish and sensation to the touch. Do not use on suede or nubuck.

How to use:

•  • Clean thoroughly with ACTIVE FOAM.

•  • Apply 0.5 ml of LIFE4X on the F-CLEAN cloth and distribute evenly.
•  • Wait for the product to be absorbed.

cod. XPP30

BUBBLE WASH – TRIGGER

750 ml

•  • Concentrated shampoo for gloss and matt paints
•  • Rinsing necessary

•  • Formula biodegradable with additives for cleaning and protection of delicate and chromed parts
•  • Compatible with belt drive

Biodegradable shampoo that can be used in both concentrated and diluted form, high cleaning power. Effective on opaque, shiny, chromed, diamond parts, mixed conditions such as spoked wheels and motorcycles with high- quality components. Eliminates oil, fat, grease, road dirt; does not contain petroleum solvents; does not affect seals, belts, plastics, rubber, tyres.

How to use:

•  • Wait for the engine to cool down.

•  • Dilute BUBBLE WASH up to 1:10 in a bucket of water depending on the degree of dirt; proceed with cleaning the surfaces with the help of a sponge; rinse with water and move on to drying.

•  • Alternatively, wet the parts to be cleaned then spray BUBBLE WASH concentrate evenly, wait 2 minutes and remove with water jet. If necessary, add product and use a brush or sponge. Rinse with water and dry.

cod. XPP31

DEFENCE

300 ml

•  • Natural protection for matt paint
•  • Prevents clinging of dirt and insects
•  • Stain barrier
•  • 
Protects matt paint from scratching

DEFENCE has high protective properties for opaque surfaces, does not stratify with use and its stain barrier keeps the finish unaltered, protecting it from scratching, from the penetration of dirt, stains, halos, insects and from atmospheric agents.

How to use:

•  • After washing, spray evenly on the opaque parts.

•  • Spread with the clean F-CLEAN EVO cloth until completely dry.

cod. XPP32

BUBBLE FIZZ

400 ml

•  • Cleansing foam
For matt and gloss paint
•  • Work
High-quality anodised and chromed parts
•  • Eliminates dirt, incrustations, oil, midges, halos
•  • Does not contain silicones, oils, wax
•  • 
No need for water and rinsing

Free of silicone, waxes, polymers and solvents, BUBBLE FIZZ cleans all the anodised and chromed parts, and matt and gloss paintwork on motorcycles and helmets thoroughly. BUBBLE FIZZ is a foaming solution that settles on surfaces and visibly acts on the parts by lifting the dirt that can be immediately removed by the F- CLEAN EVO cloth, without abrasions and scratching.

How to use:

•  • Wait for the engine and exhaust to cool down.
•  • Shake well before use.
•  • Spread BUBBLE FIZZ on the part; when the foam starts to dissolve,
•  • remove with the F- CLEAN EVO cloth or spray on the cloth and clean.

•  • Proceed in small areas, thus avoiding the product dissolving before having completed the finishing with the cloth.

cod. XPP21

DRYPLUS 5 CHAIN SMART

400 ml

•  • Synthetic lubricant with cleansing and 
Protective action

•  • Eliminates noise
•  • 
Maintains the correct coupling of the transmission for a long time

Lubricant with the latest generation of water-repellent additives that maintains the correct coupling of the transmission for a long time, increases smoothness, eliminates noise, protecting against corrosion by atmospheric agents and salt. Contains detergent additives which also facilitate the cleaning and lubrication of levers, brake lever, sheaths and cables.

How to use:

•  • To restore lubrication, apply DRYPLUS.5 on sprocket set, chain, derailleur shift.

•  • Do not use on brake tracks, brake discs, rim brake pads or disc brake pads.

cod. XPP22

RESET PRO

500 ml

•  • Cleaner and degreaser for precision mechanisms
•  • Brake system maintenance

Thoroughly degreases precision components, gearbox, derailleur, sprockets, chainrings, chain, brake discs and pads, pads and brake track (both carbon and aluminium). The high pressure delivery instantly removes grease, dirt and residues of dirt, facilitating all the overhaul operations of the central mechanism, hubs, forks, hydraulic braking system and all the parts that need highly performance cleaning. Removes tar stains from delicate and painted parts. Is compatible with rubber and plastic parts.

How to use:

•  • Direct the jet on the part and vaporise for a few seconds.
•  • Clean with the help of the F-CLEAN EVO cloth.

cod. XPP23

FILM FRAME

400 ml

•  • Protective barrier with shining effect

•  • For carbon, titanium, aluminium and steel frames
•  • Protects against corrosion

Creates a gloss protective film that maintains long-lasting shine, eliminates penetration of stains and makes subsequent cleaning of the frame easier. Particularly suitable for mountain bikes, FILM FRAME prevents mud from sticking, ensuring significant benefits in terms of weight. Protects surfaces, preventing the penetration of road dirt, mud stains, smog, tar, corrosion, salt and moisture.

How to use:

•  • Clean the frame with MTB X-WASH or E-FOAM.
•  • Apply FILM FRAME directly on the frame.
•  • Spread with an F-CLEAN cloth and remove any excess product.
•  • Do not use FILM FRAME on discs, brake pads, pads, brake track.
•  • In case of contact, clean with RESET PRO or E-FOAM.

cod. XPP24

E-FOAM

400 ml

•  • Foaming agent for high-quality gloss and matt parts
•  • Eliminates scale, removes mud stains
Removes dirt, oil and halos
•  • Does not penetrate between the couplings.

E-FOAM is the active foam for washing without water and without rinsing the whole bike. It does not penetrate between the couplings, washing away the lubricant and cleans without damaging sheaths, forks, tyres rubber parts, graphics, stickers, chromed and anodised parts, pedals, saddle, handlebar and wheels. Its innovative formula leaves no residue. It is the ideal detergent for high-quality surfaces such as carbon, aluminium and titanium frames, with glossy or matt paintwork.

How to use:

•  • Shake E-FOAM before use.

•  • Spray directly on small surfaces, wait for the product to act, and when the foam starts to dissolve clean with the F-CLEAN EVO cloth.

•  • Proceed in small areas to prevent the product from dissolving before having completed finishing with the cloth.

cod. XPP25

MTB X–WASH trigger

750 ml

•  • Concentrated shampoo for dirt sticking to gloss and matt finishes
•  • 
Rinsing necessary
•  • 
Quick and powerful, biodegradable and free from oil solvents
•  • Eliminates mud, oil, sludge and grease
•  • 
Concentrated and with rinse for cleaning the transmission

Biodegradable shampoo with selective formula, specific for washing the whole bike with water and rinsing. Used both concentrated and diluted for the cleaning and protection of carbon, anodising, titanium, aluminium, matt and gloss paintwork, without damaging tyres, rubber parts or suspensions; eliminates dirt with ease. Does not affect brake action.

Cleaning of the transmission unit:

•  • Remove dust, mud, sand and heavy dirt with a jet of water.

•  • Apply MTB X-WASH concentrate to the transmission unit and wait 3 minutes.

•  • Rinse with a direct water jet, dry and lubricate with DRYPLUS.5 or DROP LUBE.


Full cleaning:

•  • Remove dust, mud, sand and heavy dirt with water jet, dilute MTB X-WASH 1:5 in water depending on the degree of dirt, and clean the surfaces with the help of a sponge. Rinse with water and dry.

•  • Alternatively, wet the parts to be cleaned with water, spray MTB X-WASH concentrate evenly, wait 3 minutes and remove with a jet of water. If necessary, add product and use a brush or sponge. Rinse and dry.

cod. XPP26

DROP LUBE EXTRA DRY

125 ml

•  • Extra-dry lubricant
•  • 
Climate formula for arid areas
•  • Penatrating oil

It lubricates uniformly, rejects the dirt, high smoothness, protects the transmission from corrosion, even in saline environments. Excellent performance in all conditions.

How to use:

•  • Direct the jet on the part to be cleaned and steam for a few seconds.
•  • Clean with the F-CLEAN EVO cloth

cod. XPP27

DROP LUBE WET

125 ml

•  • Wet lubricant climate formula for muddy and wet environments

It lubricates uniformly, rejects the dirt, resists water and mud, high smoothness, protects the transmission from corrosion. How to use:

•  • Shake E-FOAM before use.
•  • Spray directly on small surfaces, wait for the product to act and when the foam begins to dissolve, clean with the F-CLEAN EVO cloth.
•  • Work in small areas to prevent the product from dissolving before finishing with the cloth.

ESPOSITORE

Product available on request

The quantity of products displayed depends on the selection.